Maintaining the power steering system on your BA Falcon can be daunting, especially when it comes to bleeding the air out of the system. If you don’t do it right, you could have steering problems that can be difficult and expensive to fix. That’s why they are here to help! That blog post shows you how to properly bleed your BA Falcon Power Steering Pump and avoid common issues. They will also provide helpful tips on maintaining the system and keeping it running smoothly.
Check the power steering fluid level and add fluid if necessary.
Before starting to bleed your BA Falcon power steering system, it’s crucial to ensure adequate power steering fluid level. You can quickly check that by opening the hood of your car and locating the power steering fluid reservoir. The reservoir is typically located near the windshield on the driver’s side of the engine bay. Remove the cap and check the fluid level once you’ve located the power steering fluid reservoir. If the story is below the minimum mark, you must add power steering fluid. Ensure you use the recommended fluid type for your car, which you can find in the owner’s manual.
Avoid spilling it onto the engine bay
It’s important to note that adding too much fluid can also cause problems with your power steering system, so ensure you don’t overfill the reservoir. To add liquid, use a funnel to avoid spilling it onto the engine bay. Checking the power steering fluid level is essential in bleeding your BA Falcon power steering system. Without adequate fluid, your power steering system won’t function correctly, and you could cause damage to your power steering pump or other components. So take the time to check the fluid level and add fluid if necessary before moving on to the next step.
Raise the front end of the car off the ground.
To properly bleed your BA Falcon power steering system, you must raise the front end of your car off the ground. That will allow air to rise to the system’s top, making it easier to bleed. Use a jack, and jack stands to safely lift the car off the ground. Make sure the vehicle is stable and secure before proceeding. It’s also important to note that bleeding your power steering system is typically a two-person job. While one person turns the steering wheel, the other person will monitor the power steering fluid level and add fluid if necessary. That ensures that the system stays filled adequately throughout the process. Once the car is raised, start the engine and let it idle. It’s best to perform the bleeding process when the engine is excellent to avoid any potential injuries. Turn the steering wheel from lock to lock with the engine running several times. That helps to circulate the power steering fluid throughout the system and remove any trapped air.
Feel resistance
As you turn the steering wheel, you may hear a hissing sound or feel resistance in the steering. That is a normal part of the bleeding process and should disappear as you turn the wheel. After turning the wheel several times, check the power steering fluid level and add fluid if necessary. Lower the car back to the ground and test drive it to ensure the problem is fixed. You should notice smoother steering and less noise or resistance when wheeling. If you still experience problems, it may be necessary to repeat the bleeding process or have a professional mechanic look at your power steering system. By following these steps, you can adequately bleed your BA Falcon power steering system and avoid common problems that may arise from air bubbles in the system. Always be cautious when lifting a car and have a second person assist you during the bleeding process.
Start the engine and let it idle
Once you have raised the front end of your BA Falcon off the ground, it’s time to start the engine. Let the engine run for a few minutes while it idles. That allows the power steering fluid to circulate through the system and helps to push all the air pockets out. While the engine is idling, keep an eye on the power steering fluid level. If the level drops significantly, that could indicate that there is still air in the system. Add more power steering fluid if necessary, but do not overfill it. Next, turn the steering wheel from lock to lock several times. That helps to further circulate the power steering fluid throughout the system and push out any remaining air bubbles. Make sure you turn the steering wheel slowly and steadily without forcing it.
Turn the steering wheel from lock to lock several times
Once you’ve started your engine and raised your car off the ground, it’s time to start working on your power steering system. One of the critical steps in bleeding air from your BA Falcon power steering system is turning the steering wheel from lock to lock several times. What does “lock to lock” mean? It simply means turning the steering wheel to one side until it stops (that is the “lock” position) and then turning it to the other side until it stops (that is the opposite “lock” position). Repeat that several times to help move any air bubbles out of your power steering system. You may notice some unusual noises as you turn the wheel, like a whine or a hiss. That is normal and is just air moving through the system. Keep turning the wheel until the noise subsides.
Recheck the power steering fluid level and add fluid if necessary
Once you’ve turned the steering wheel from lock to lock, it’s essential to recheck the power steering fluid level. That will allow you to determine if the fluid has settled and if the system requires additional fluid. Locate the power steering reservoir and remove the cap to check the fluid level. The liquid level should be between the “minimum” and “maximum” marks on the dipstick. You’ll need to add more fluid if it’s below the minimum mark. When adding fluid, use the recommended power steering fluid for your BA Falcon, and add it slowly to avoid overfilling the reservoir. Once you’ve added the juice, replace the cap, start the engine, and let it idle again while turning the steering wheel from lock to lock. If you’re still experiencing problems with the power steering system after adding fluid, other issues may be at play, such as a damaged power steering pump or hose. In such cases, it’s best to have a professional mechanic take a closer look and fix the issue to ensure the continued smooth operation of your car.
Ford Falcon Power Steering Pumps lower the car back down to the ground
Once you have completed bleeding the air from your Ford Falcon Power Steering Pumps, it’s time to lower the car back to the ground. That is a crucial step in ensuring the power steering system functions appropriately. To lower the car, use a jack to slowly reduce the front end until it’s resting on the ground. Once the vehicle is on the floor, turn off the engine and check the power steering fluid level one last time. It should be at the proper level and free of air bubbles. If you notice any issues with the power steering after completing these steps, it’s best to seek professional help. Attempting to fix power steering issues on your own can be dangerous and can result in further damage to your car.
Test drive the car to make sure the problem is fixed.
After you have completed bleeding your BA Falcon power steering system, it’s time to take your car for a test drive. It’s essential to ensure the issue is resolved and the power steering system works correctly. While test-driving your vehicle, pay close attention to any unusual noises or vibrations from the steering wheel. Check for any change in how the steering wheel responds when turning left or right. You should also notice if the steering wheel feels stiff or loose when driving the car. Ideally, the steering wheel should turn smoothly and consistently without lag or resistance. It’s also essential to take note of the power steering fluid level after the test drive. Ensure the fluid level is within the recommended range to ensure the power steering system works correctly.
Conclusion
By following the simple steps outlined in that article, you should be able to effectively bleed air from your BA Falcon power steering system and avoid common problems arising from the perspective of the system. Always check the power steering fluid level, add fluid if necessary, and raise the car’s front end off the ground before starting the engine. It’s also essential to turn the steering wheel from lock to lock several times, recheck the fluid level, lower the car back to the ground, and test drive the vehicle to ensure the problem is fixed. If you encounter any difficulties or have further questions, consult your car manual or a trusted mechanic.